Viglen Vig565s, Руководство пользователя

Страница: 14 / 86

Vig565s Motherboard Manual
13
K – Processor fan connector
Allows for the processor fan to be connected. The fan header is PWM compliant.
L – DIMM Channel A & B Sockets
This allows up to 4GB of DDR RAM to be installed. Up to 1GB of RAM in each slot.
M – I/O controller
Handles all the input/output signals to and from the motherboard.
N – Floppy drive connector
This allows a floppy drive to be added to the motherboard. The port is slotted to
ensure correct installation.
O – Parallel IDE (P-ATA) connector
This allows up to 2 devices, such as CD/DVD drives and hard drives to be added
to the IDE channel. The port is slotted to ensure correct installation.
P – Power connector (24 way ATX2.2)
This is the main power connector.
Q – Intel® 82801FB I/O Controller Hub (ICH6)
The Intel® ICH6 Southbridge represents the sixth generation I/O controller hub that
provides the interface for PCI Express and 8-channel high definition audio.
R – Serial ATA (S-ATA) connectors
This allows for up to 4 devices. One device can be installed on one S-ATA connector
on the motherboard running at 150MB/s.
S – Front panel connector
This is the panel to which the case cables are connected, such as the power switch.
Power LED etc.
T – 4 Mbit Firmware Hub (FWH)
This is an optional feature which is not offered by Viglen.
U – Front panel USB connectors
This allows an additional 2 USB ports to be added with the use of a cable.