Viglen VIG520S, Руководство пользователя

Страница: 68 / 86

67 of 85
Set Supervisor Password/Set User Password
These two options set the system passwords. “Supervisor Password” sets a
password that will be used to protect the system and the Setup utility; “User
Password” sets a password that will be used exclusively on the system. By default,
the system comes without any passwords. To specify a password, highlight the type
you want and then press the <enter> key. A password prompt appears on the
screen. Taking note that the password is case sensitive, and can be up to 8
alphanumeric characters long, type in your password and then press the <enter>
key. The system confirms your password by asking you to type it again. After
setting a password, the screen automatically reverts to the main screen.
Supervisor Password
If set the Supervisor password allows full access to the BIOS setup Utility menus.
Continued
AwardBIOS Setup Utility
AwardBIOS Setup Utility AwardBIOS Setup Utility
AwardBIOS Setup Utility
Main Advanced Power Boot Exit
System Time [17:23:54]
System Date [06/22/2002]
Legacy Diskette A [1.44M. 3.5 in]
Legacy Diskette B [None]
Floppy 3 Mode Support [Disabled]
8
Primary Master [Auto]
8
Primary Slave [Auto]
8
Secondary Master [Auto]
8
Secondary Slave [Auto]
8
Keyboard Features
Language [English]
Supervisor Password [ Disabled ]
User Password [Disabled]
Halt On [All Errors]
Installed Memory 128MB
F1 F1 F1 F1 Help
↑↓ Select Item +/- Change Values F5 Setup Defaults
ESC ESC ESC ESC Exit
←→ Select Menu Enter Select
8
Sub-Menu F10 F10 F10 F10 Save and Exit
<Enter> to Select Filed;
<+>,<-> to change value
Item Specific Help
Enter Password: