Viglen VIG520S Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 86

background image

46 of 85

Language Support

The Setup program and help messages can be supported in 32 languages. The
default language is American English, which is present unless another language is
programmed into the BIOS using the flash memory update utility.

Boot Options

In the Setup program, the user can choose to boot from a floppy drive, hard drive,
CD-ROM, or the network. The default setting is for the floppy drive to be the primary
boot device and the hard drive to be the secondary boot device. By default the third
and fourth devices are disabled.

Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM
format specification. Under the Boot menu in the Setup program, CD-ROM is listed
as a boot device. Boot devices are defined in priority order. If the CD-ROM is
selected as the boot device, it must be the first device.

The network can be selected as a boot device. This selection allows booting from a
network add-in card with a remote boot ROM installed.

USB Support

The USB connectors allow any of several USB devices to be attached to the
computer. Typically, the device driver for USB devices is managed by the operating
system. However, because keyboard and mouse support may be needed in the
Setup program before the operating system boots, the BIOS supports USB
keyboards and mice.

BIOS Setup Access

Access to the Setup program can be restricted using passwords. User and
supervisor passwords can be set using the Security menu in Setup. The default is
no passwords enabled.

«
...
45
46
47
48
49
...
»

Содержание VIG520S























































































Отзывы:

Нет отзывов

Похожие инструкции для VIG520S

Бренд: Yamaha Страницы: 20

Бренд: Lantronix Страницы: 8

Бренд: MINN KOTA Страницы: 14

Бренд: AOpen Страницы: 8

Бренд: mikroElektronika Страницы: 29

Бренд: ASROCK Страницы: 56

Бренд: AOpen Страницы: 44

Бренд: ECS Страницы: 66

Бренд: VIA Technologies Страницы: 15

Бренд: Intel Страницы: 73

Бренд: IEI Technology Страницы: 194

Бренд: Gigabyte Страницы: 88

D850MV - Desktop Board Motherboard

Бренд: Intel Страницы: 25

Бренд: Sleipner Страницы: 24

Бренд: JETWAY Страницы: 47

Бренд: Gigabyte Страницы: 75

KIT34704BEPEVBE

Бренд: NXP Semiconductors Страницы: 39

Бренд: ASROCK Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды