Vigitron MaxiiNet Vi30018, Руководство по эксплуатации

Страница: 75 / 122

Page | 75
MAC Address Binding: This feature establishes a specific relationship
between the switch’s physical port and connected device’s MAC address.
Only the packets from the assigned MAC address can be transmitted to
the connected port. Up to three MAC addresses can be assigned to each
port.

Select the Port

Enter up to three MAC addresses

Enable Read

Enable Binding

Select UpDate
NOTE:
If the MAC address binding function is enabled, the
address learning function if selected will be disabled.
WARNING:
Setting multicasting addresses to these fields is
not allowed.
To activate the port binding function, you should enter the correct MAC
address, select the port number, and set the port binding to “Enable” and
then press “Update”.
Port access will be limit to only those MAC address. It is important that
the correct MAC address associated with the port be entered.
Caution: Once you bind a device’s MAC address to a port, only that
device will be allowed to connect. If an unbound device is connected to a
bound port, the link light will be active, but no information will be
transmitted.
15.1 Scanning
MAC Addresses