Vigitron MaxiiNet Vi30018, Руководство по эксплуатации

Страница: 109 / 122

Page | 109
LLDP
The Link Layer Discovery Protocol (LLDP) specified in this standard allows
stations attached to an IEEE 802 LAN to advertise, to other stations attached to
the same IEEE 802 LAN, the major capabilities provided by the system
incorporating that station, the management address or addresses of the entity or
entities that provide management of those capabilities, and the identification of
the stations point of attachment to the IEEE 802 LAN required by those
management entity or entities. The information distributed via this protocol is
stored by its recipients in a standard Management Information Base (MIB),
making it possible for the information to be accessed by a Network Management
System (NMS) using a management protocol such as the Simple Network
Management Protocol (SNMP).
LLDP-MED
LLDP-MED is an extension of IEEE 802.1ab and is defined by the
telecommunication industry association (TIA-1057).
LOC
LOC is an acronym for Loss of Connectivity and is detected by a MEP and is
indicating lost connectivity in the network. Can be used as a switch criteria by
EPS.
M
MAC Table
Switching of frames is based upon the DMAC address contained in the frame.
The switch builds up a table that maps MAC addresses to switch ports for
knowing which ports the frames should go to (based upon the DMAC address in
the frame). This table contains both static and dynamic entries. The static entries
are configured by the network administrator if the administrator wants to do a
fixed mapping between the DMAC address and switch ports.
The frames also contain a MAC address (SMAC address), which shows the MAC
address of the equipment sending the frame. The SMAC address is used by the
switch to automatically update the MAC table with these dynamic MAC
addresses. Dynamic entries are removed from the MAC table if no frame with the
corresponding SMAC address has been seen after a configurable age time.
Mirroring
For debugging network problems or monitoring network traffic, the switch system
can be configured to mirror frames from multiple ports to a mirror port (In this
context, mirroring a frame is the same as copying the frame.) Both incoming
(source) and outgoing (destination) frames can be mirrored to the mirror port.
MLD
MLD is an acronym for Multicast Listener Discovery for IPv6. MLD is used by
IPv6 routers to discover multicast listeners on a directly attached link, much as
IGMP is used in IPv4. The protocol is embedded in ICMPv6 instead of using a
separate protocol.