VZ-WM60
Installation Instructions
Visit the ViewZ website at http://www.viewzusa.com
Page 11
Two people are required for this step.
Upper Rail
Lower Rail
Flat-Panel
Solid
Surfac
e
Cinder
Blo
ck
Attaching the Display to the Flat Panel
Flat Mount
5°
Fixed Tilt
Step 1. Raise the flat panel (two people required) past the top and bottom mounting rails and slide the flat panel down slowly, keeping
it close to the wall, and engage the mounting brackets to the rails of the wall plate.
Top Rail
Bottom Rail
Do not release the flat panel until the top and
bottom hooks of the arms are resting fully on the
upper and lower mounting rails.
Fixed 5° Tilt Bracket Installation (Optional)
The fixed tilt brackets allow for a fixed forward 5° tilt. Please read the following installation instructions to attach the fixed tilt
brackets.
Mounting Bracket
M6 x 8mm Screw
M4 x 6mm Screws
Step 1. Pre-install two (2) M4 x 6mm
screws to the fixed tilt bracket.
Step 2. Slide the tilt bracket through the
open slots of the upper mounting
bracket slot and align the mounting
holes.
Step 3. Once the upper mounting holes
are aligned, insert and tighten the
two (2) M6 x 8mm Phillips head
screws through the mounting
bracket and the fixed tilt bracket.
Step 4. Repeat this process for the
remaining tilt bracket.
Do not overtighten the hardware.
Open Slots
Fixed
5°
Tilt
Bracket
M4 x 6mm Screws
