53
User Manual
Visit the ViewZ USA website at https://www.viewzusa.com
Maintenance
C0NTROL OPERATION
6.6.1. Maintenance - Screen Set & Backdisplay Screen
1.
On the
Screen Set
window of
MAIN NAVIGATION
/Maintenance
, click enable Screen Group and set the physical
screens and logical screens.
ex. If you have total 4 monitors (2x2), you decide to use 3 monitors (as the
Main Group screens
) and 1 monitor
(as a
Backdisplay Screen
). Then, you need to type Physical Screens Row - 3 & Col - 1 and Logical Screens Row - 1
& Col - 1.
2.
After input Physical & Logical Screens number, click the
Port-set
button (on the top-right corner)
3.
On the
Screen Port Set
window, select
Main Screen
on the top-right corner selection window
.
4.
Drag & drop the left output port (labeled as
Main Screen
) to the right window - each section means a single
monitor.
5.
Select
Display Back Screen
on the top-right corner selection window.
6.
Drag & drop the left output port (labeled as
Display Back Screen
) to the right window.
7.
Click
OK
to complete the setup.
03 : Port 0
03 : Port 1
03 : Port 3
03 : Port 2
