42
User Manual
Visit the ViewZ USA website at https://www.viewzusa.com
Network Input Source
C0NTROL OPERATION
6.2. Network Input Source - Display Setup
•
To setup the display of IP signal, you need to setup an IP address in
'Encoder Set'
window. The decoder IP
address setting method is as follows:
1.
On the
MAIN NAVIGATION
, go
Maintenance/Encoder
button to pop up the encoder setting window
2.
Type the IP/Gateway/Subnet Mask & DNS based on your network preference.
3.
Type the Name as you prefer and choose the Display Type / Group (layout)
4.
Display Type has options - Synchronous Echo, Cloud Screen, Signal Preview and Disable. Please select
Synchronous Echo mode and then click OK to save & exit.
•
On the
MAIN NAVIGATION
, go
Main Function/Screen Group
and click to check
Show image
.
•
Double-click to open the newtwork input source, then the image/video will be synchronized with the
SCREEN
LAYOUT
input-windows. (see the figure below)
