background image

TROUBLESHOOTING / QUICK TIPS CONTINUED.

I found the manual very difficult to write because the Software still resides in BETA and there are still 
problems that need to be resolved.  e main problems are in Audio / Recording / functionality of the 
receiver /Remote Control and of course the provider interference.   

It’s because of rapid fire (BF) Bin Files we are getting every month and each BF will fix one thing but will 
break another so there is constant reporting of Software Bugs to deal with each release.  So to work around 
this I have compiled this Manual to help other VS9000HD owners a place to come and resolve there 
problems.  A paper life raft I call it.  

Quick Tip are all listed here in this manual so if your do get into a problem with your receiver this manual 
will help get back up and running again with out wasting valuable time.

is manual was created for all VS9000HD owners of the world..... 

is VS9000HD Manual was complied with the efforts of FTADOC VIP members.

 

 

 

 

as a proud parent of a VS9000HD receiver.

 

 

-whitefish

 

 

April 18th /  2008

is Manual was Created and Compiled on a iMac using Apple Pages Software.

Document page.19

VIEWSAT 9000HD User Troubleshooting Guide & Manual.    April /2008

Содержание VS9000HD




















Отзывы: