ViewSat VS9000HD Скачать руководство пользователя страница 4

(7)  HOW TO RECORD AND PLAYBACK:

1.  If recording time is less than 30 seconds, the event will not be saved.

2.  Make sure that Reservations is turned on in the EPG Settings.

3.  Install a External Hard Drive Formatted by the VS9000HD receiver or the Drive is in FAT 32 
format. Use the REAR USB connector to record.

4.  In the Guide you can select Record now or Future Events by selecting a time to record and then 
press F1.

5.  F1 will give you a selection RECORD / VIEW choose Record.

6.  Once the selection starts recording a RED (R) will display but will turn off in about minute, you are 
still recording if there is a RED indicator light on the VS9000HD Display.

NOTE:

  

Format External Drive via VS9000HD receiver. With the External Drive connected to USB port 

select Menu / Main Menu / Media / USB Storage / OK / Yes.

Playback:

1.  Select Main Menu / Menu / Media / DVR and a list will show with your recordings as 
VSHD_DATA / Press OK.  In side this folder your recordings will be listed.

NOTE:

  

is software still resides in BETA and problems do accrue  so keep a new copy of the 

FIRMWARE / Bin File handy, when problems can not be resolved,  it’s best to select Factory Default 
and load a new Bin File.  is will save time and frustrations and get you up and running a lot quicker.

(8)  CABLES:

• 

1.  RG-6, Copper Coated Steal Coax Cable.

      

Standard Shield with Waterproof Layer, FR-PE Jacket, For Direct Burial.

      

60% Aluminum Braid Over Foil Provides 100% Shield Coverage.

      

18AWG Solid .040” Bare Copper-Clad Steel Conductor.

      

Gas Injected Foam Polyethylene Insulation.

      

Ideal for RF Applications Like Outdoor TV Antennas and Cable Television.

      

Aluminum-Mylar Shield and a 60% inner Copper Shield.

      

CM/CL2 Rated PVC Jacket.

      

Sweep Tested to 2.2GHz.

      

Sequential Foot Marking.

      

UL Listed.

2.  Snap-N-Seal Connectors 

are the most effective. 

connectors used with RG6.

3.  SPDIF. Optical. Belkin 

make the best SPDIF Audio Cables in the US.

4.  RCA Cables. Belkin 

Make the best RCA Cables in the US.

5.  HDMI. (High-Definition Multimedia Interface) is the first and only industry-supported, 
uncompressed, all-digital audio/video interface. By delivering crystal-clear, all-digital audio and video 
via a single cable, HDMI dramatically simplifies cabling and helps provide consumers with the 
highest-quality home theater experience. HDMI provides an interface between any audio/video 
source, such as a set-top box, DVD player, or A.V. receiver and an audio and / or video monitor, such 
as a digital television (DTV), over a single cable.

• 

6.  

8PSK

 cable should be RG6 about 7” in length connected between 8PSK Tuner and Loop OUT on 

 

the VS9000HD Receiver.

NOTE: 

 

All cables are only as good as they are kept.

Document page.4

VIEWSAT 9000HD User Troubleshooting Guide & Manual.    April /2008

Содержание VS9000HD




















Отзывы: