ANTENNA SET-UP CONTINUED.
en do this:
Preparing the TP Frequencies for Echo 9-121W:
Go to Menu -> Installation -> Channel Scan
Select EchoStar 9
Scroll down to Edit TP -> OK
Now scroll thru the window and delete all the TP Freqs by pressing the [F3] Delete TP button.
en, while in this window: Press F1 to Add User TP Enter: TP Freq: 11715...S/R: 20000...Pol: V...FEC: 7/8
Exit and then Save.
Now go to Auto Scan:
Auto Scanning all available TP Freqs and Channels from 118.8w (121W):
Echo 9 should be selected, Scan Search All, Scroll down one and turn Network search to OFF (right arrow).
Highlight Start Scan and Hit Ok. You should now get over 123 channels if your dish is 24" or larger.
Please Note: No Sat ID lock will be displayed at the top right hand corner of the screen. e coders have not
included this function yet. While TP Freq 11715 is chosen you should have a Q signal of 20% or higher. is
signal strength is strong enough to scan TPs and Channels and no pixelation should occur while viewing.
e larger the dish of course the higher the Q signal value.
Update:
For those using the Special LNB for 119/118.8 from Digiwave, try these settings below (From the Digiwave
Site itself ) Digiwave LNB Setup Instructions Using a 30-inch or larger dish, aim with the following settings:
For DGL-1189S you should setup as below will work better: Satellite Name: 118.8°W (Anik F3) or 119°W
(Echo7)
* LNB Power: ON
* LNB Type: Universal
* LNB Frequency: 9750Mhz/10750 MHz
Finally, do an AUTO SCAN or a BLIND SCAN
For DGL-1189D and DGL-1189Q you should setup as: Satellite Name: 118°W (Anik F3) or 119°W (Echo7)
* LNB Power: ON
* LNB Type: Universal
* LNB Frequency: 9750Mhz/10600 MHz
Finally, do the Auto Scan procedure above.
3 Types of KU LNBs used for Satellite 118.8. Dish 30” Plus with KU Band Optical LNB
Document page.12
VIEWSAT 9000HD User Troubleshooting Guide & Manual. April /2008
