4
• Ensure the tread is level on the tread bracket both front
to back and left to right
• Using the
5
/
16
" x 2
1
/
2
" RSS Screws, attach the tread to
the tread bracket
• During this step, alternate sides of the bracket when
fastening screws. This will prevent the tread from
pulling unevenly
• Place a single tread on to one of the tread brackets
about half-way up the stringer
• Thread the
1
/
2
" x 1" flange bolts through the tread
bracket and into the stringer in the marked order, so
they are finger tight
• Torque to 70 lb-ft
12
11
10
9
Straight Stringer Installation Steps (Continued)
© 2021 VIEWRAIL All Rights Reserved · (866) 261-8013 · viewrail.com · For Helpful Tutorials go to www.youtube.com/viewrail
