2
• Use the provided drawing(s) to mark the header
plate dimensions
• At this point, mark a predrill location for the slotted
hole in your header plate
4
3
2
1
Straight Stringer Installation Steps
• Slide the Header insert into the stringer body
• Line up the holes
• Using the access hole at the end of the stringer body
& (6)
1
/
2
"-13 x 1
1
/
2
" Flange Bolts, (6)
1
/
2
" Washers &
(6)
1
/
2
" Nylon Lock Nuts, secure the insert into place
• Torque to 70 lb-ft
• Slide the Foot insert into the stringer body
• Line up the holes
• Using the access hole at the end of the stringer body
& (6)
1
/
2
"-13 x 1
1
/
2
" Flange Bolts, (6)
1
/
2
" Washers &
(6)
1
/
2
" Nylon Lock Nuts, secure the insert into place
• Torque to 70 lb-ft
• Identify the top and bottom inserts
3
© 2021 VIEWRAIL All Rights Reserved · (866) 261-8013 · viewrail.com · For Helpful Tutorials go to www.youtube.com/viewrail
Side Panel of Stringer Body cut away to show detail
Side Panel of Stringer Body cut away to show detail
