3
• Place all tread brackets on the stringer
• Insert locator pins to hold the tread brackets in place
• Fasten the
1
/
2
" x 3
1
/
2
" Hex Lag through the middle
slotted hole in the header plate to hold the stringer
in place
• Lift the stringer into place, lining up the hole
• We recommend using either a pulley system or a Come
Along Winch and brace material to hold the stringer in
place while fastening
• Predrill with a
3
/
8
" drill bit
8
7
6
5
Straight Stringer Installation Steps (Continued)
© 2021 VIEWRAIL All Rights Reserved · (866) 261-8013 · viewrail.com · For Helpful Tutorials go to www.youtube.com/viewrail
