VIETA VC-HA4000BT, Руководство пользователя

Страница: 16 / 28

CD/USB/SD Android Radio
16
6. Dialling or receiving call at unit sleep mode When
the car radio is in standby mode (Acc on and Power
off), when dialling or receiving a call, the car radio will
power on automatically. After the call is completed,
the radio will revert to standby mode.
7. To transfer the audio of a file played by Mobile
Phone to the Car Audio Player
If the mobile phone supports A2DP and could play
audio, when the Mobile Phone plays an audio file(For
some Mobile Phones, you must select Play by BT
firstly), the playing will be transferred to the Car Audio
Player.
In A2DP mode, if the Bluetooth device of the Mobile
Phone support AVRCP, the functions of the >>|, |<< and PLAY/PAUSE buttons are the same as one in
disc mode(no fast forward/backward functions for
the >>|/|<< buttons). The other buttons available in
disc mode are not available.
In A2DP mode, if the Bluetooth device of the Mobile
Phone support AVRCP, pressing the MODE button
can switch on between the radio, disc, USB, CARD
and A2DP. But after entered the A2DP mode again,
to resume the playback and transfer to the Car Audio
Player by the Mobile Phone, you must press the
PLAY/PAUSE button.
In A2DP mode ,if the phone music play mode turn to
the radio mode, you need to wait about 10 seconds.
Installation
Installation method
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna according to the requirements
of this Instruction Manual, then install the metal mounting sleeve into the car as per the diagram illustrated
below.
Bend the tabs on the metal mounting
sleeve against the DASHBOARD with
a screwdriver.
To boost up the capability of anti-
jamming, please make sure fix tightly
the support strap into the metal joint
that connect to the metal chassis of
the car.
METALSUPPORT STRAP
DASHBOARD
METAL MOUNTING SLEEVE
To remove the unit out of the metal mounting
sleeve, insert the two supplied KEYS into the left
and right side slots of the chassis at the same time.
Then pull the chassis out of the metal mounting
sleeve as shown in the right illustration.
UNIT CHASSIS
PLASTIC TRIMRING
FRONT PANEL