Viessmann Vitorond 200 VD2 1080, Инструкция по эксплуатации

Страница: 28 / 32

32
Appendix
Declaration of conformity for Vitorond 200
(cont.)
For operation with a safety temperature of 120 º C:
We, Viessmann Werke GmbH
Ă
&
Ă
CoĂKG
,
DĆ35107 Allendorf, declare as sole
responsible body, that the product
VitorondĂ200
conforms to the following standards:
ENĂ226
ENĂ267
ENĂ303
ENĂ50Ă082Ć1
ENĂ50Ă165
ENĂ55Ă014
ENĂ60Ă335
ENĂ61Ă000Ć3Ć2
ENĂ61Ă000Ć3Ć3
TRDĂ702
This product is identified in
accordance with the following
guidelines:
73/ă23/EEC
89/336/EEC
92/ă42/EEC
97/ă23/EC
98/ă37/EC
as follows:
_ Ć0085
_ Ć0036
This product meets the requirements of the Efficiency Directive (92/42/EEC)
for:
Low temperature boilers
The declaration of conformity for the oil and gas pressure jet burners is
contained in the burner manufacturer's documentation.
Details according to the Pressure Device Directive (97/23/EC):
H Pressure combustion device
H ClassĂIII acc. to appendixĂII, diagramĂ5
H ModulesĂB and C1 acc. to appendixĂIII
H Materials acc. to TRDĂ702 acc. to individual assessment and appendixĂI, Ă4.2Ă, b)
H Anti-corrosion addition acc. to appendixĂI, 2.2, not required, since minimum
wall thicknesses acc. to TRD 702, table 3 are maintained.
The pressure device was tested without equipment (safety equipment). The
pressure device must be equipped in accordance with current national
requirements before installation and the initial start-up.
This boiler meets the requirements of all current TRD regulations.
The product characteristics determined as system values for VitorondĂ200 as
part of EC type testing acc. to the Efficiency Directive (see specification table),
can be utilised to assess the energy consumption of heating and ventilation
equipment acc. to DINĂVĂ4701Ć10 which is prescribed by the EnEV.
5692Ă517ĂGB