Viessmann Vitorond 200 VD2 1080, Инструкция по эксплуатации

Страница: 2 / 32

2
General information
Safety instructions
Please follow these safety instructions closely to prevent accidents and
material losses.
Work on the equipment
Installation, initial start-up, inspection,
maintenance and repairs must only
be carried out by a competent person
(heating engineer/installation
contractor).
Before working on the equipment/
heating system, isolate the mains
electrical supply (e.g. by removing a
separate mains fuse or by means of
a mains electrical isolator) and
safeguard against unauthorised
reconnection.
When using gas as fuel, also close
the main shut-off valve and safeguard
against unauthorised reopening.
Work on gas equipment
This must only be carried out by an
approved contractor.
Please observe all commissioning
work for gas installations specified
acc. to TRGI or TRF, or local
regulations.
Repair work
It is not permitted to carry out repairs
on parts that fulfil a safety function.
Use only original Viessmann spare
parts, or equivalent parts that have
been approved by Viessmann.
Initial start-up
The initial start-up must be carried
out by the system installer or a
designated commissioning engineer;
all actual values should be recorded
in a commissioning/service report.
Instructing the system user
The system installer must hand the
operating instructions to the system
user and instruct him/her in the
operation of the system.
¨ Ă Safety instruction
In this instruction manual, this
heading denotes information which
must be observed to prevent
accidents and material losses.
Operating and service documents
1. Complete and detach the customer
registration card:
H Give the system user this part
for safe-keeping.
H Retain the heating engineer
portion.
2. File all parts lists, operating and
service instructions in the folder
and hand this over to the system
user.
5692Ă517ĂGB