Viessmann Vitoligno 300-H, Инструкция по эксплуатации для пользователя системы

Страница: 57 / 72

57
Cause Remedy
Control unit incorrectly set. Check the settings and correct if required:
■ The heating circuit must be on (see
page 24)
■ Room temperature (see page 24)
■ Time (see page 46)
■ Switching times (see page 25)
Control unit fault or outside temperature
sensor/boiler water temperature sensor
faulty:
"Fault" is shown in the display. The red
fault indicator flashes.
Check the type of fault (see page 50) and
notify your local heating contractor.
Heating circuit with mixer: Mixer motor
faulty Unhook motorised lever A . Adjust mixer
lever B manually (e.g. to "5").
Inform your local heating contractor.
What to do if...
Rooms are too hot
5549 811 GB