24
Check if
"Heating"
is set for the relevant
heating circuit.
Heating circuit 1
Party mode
Economy mode
Set room temp.
HC1
Select with
Heating program
Press the following keys:
1.
ä
repeatedly until the standard
menu is displayed.
2.
|
/
~
for
"Heating"
.
3.
d
to confirm.
4.
Ù
/
Ú
to select
"Heating circuit 1"
(HC1),
"Heating circuit 2"
(HC2),
"Heating circuit 3"
(HC3) or
"Heating cir-
cuit 4"
(HC4, if installed).
5.
|
/
~
for
"Operating program"
.
6.
d
to confirm.
The check mark must be next
to
"Heating"
.
If not, proceed as follows:
7.
|
/
~
for
"Heating"
.
8.
d
to confirm.
The rooms of the selected heating circuit
are heated in accordance with the room
temperature and time program settings.
Setting a time program
The time when the heating circuit deliv-
ers central heating with standard or
reduced room temperature is dependent
on the settings of the switching times for
the relevant day (4 possible time pha-
ses).
■ If one or more time phases are selec-
ted, central heating with standard
room temperature will be active for
those times.
■ If no time phases are selected, central
heating will be enabled for the whole
day with reduced room temperature.
■ For central heating, up to 4 changes
per day between standard and
reduced room temperature can be pro-
grammed (4 time phases).
■ At the factory,
time phase
!
is set for
every day from 06:00 to 22:00 h. Dur-
ing that time, all rooms are heated to
the standard room temperature.
Central heating
Setting the operating program
5549 811 GB
Содержание Vitoligno 300-H
Страница 71: ...71 5549 811 GB...
