Viessmann VITODENS 200-W WB2B 105, Инструкции по установке и эксплуатации

Страница: 51 / 80

Service Scans Service Scans
51
Service Level Overview
(continued)
Coding level 1
Plain text display Press “
9
” and “
w
”
for approx. 2 sec.
simultaneously.
Press “
9
” and “
w
”
for approx. 1 sec.
simultaneously.
38
Coding level 2
Numerical display Press “
w
” and “
rw
” for
approx. 2 sec.
simultaneously.
Press “
w
” and “
rw
”
for approx. 1 sec.
simultaneously.
40
Resetting coding addresses
to the factory default setting Press “
w
” and “
rw
” for
approx. 2 sec. simultaneous-
ly; then press “
“
-- 50
Temperatures, Boiler Coding Card and Brief Scans
1. Press “
9
“ + “
r
r r
rw
“ simultaneously
for approx. 2 sec.
2. Press “
⊕
/ “ for the required scan.
3. Press “ ” to complete the scan.
The following values can be scanned, depending on the system installed:
Display screen Explanation Display screen Explanation
Slope A1
*1
- shift A1
Slope M2
*1
- shift M2
Outdoor temperature adjustment
Outdoor temperature actual The adjusted outdoor temperature can
be reset to the actual outdoor temper-
Outdoor temperature actual
Boiler temperature setpoint
Boiler temperature actual
DHW temperature setpoint
DHW temperature actual be reset to the actual outdoor temper-
ature with “
“.
DHW temperature setpoint
DHW temperature actual
Supply temperature
Supply temperature actual
Common supply temperature setpoint
Heating circuit with mixing valve.
Heating circuit with mixing valve.
Low-loss header.
Common supply temperature setpoint
Common supply temperature actual
Boiler coding card
Brief scan 1 to 8 Low-loss header.
Low-loss header.
*1
A1 = Heating circuit without mixing valve. M2 = Heating circuit with mixing valve.
Brief
scan Display screen
8 8 8 8 8 8
1 Software version
Control unit Equipment version Burner control unit
version
2
System designs
01 to 06 Number of KM
BUS participants
Maximum heat demand temperature
3 0 Software version
Programming unit Software version
Mixing valve
accessory kit
0: no mixing
valve accessory
kit Software version
Solar control unit
(if used)
0: no solar
control unit Software version
LON communica-
tion module
0: no LON
communication
module Software version
External
extension
0: no external
extension
5
4
4
3
2
0
7
v
1
.5
5
4
4
3
2
0
7
v
1
.5