Viessmann 301.BS090, Инструкции по установке и обслуживанию для подрядчиков

Страница: 7 / 100

7
The heat pumps Vitocal 300-G Pro SPS,
type BW 301.BS090 to 302.BS250 and
Vitocal 300-W Pro SPS, type WW 301.BS125 to
302.BS300 may be used for the following purposes:
■ Central heating and cooling via a heating system
■ DHW heating
■ Swimming pool heating
Any use that differs from or goes beyond this is consid-
ered inappropriate.
Note
The Vitocal 300-G/W Pro SPS must be operated
exclusively by authorised and trained personnel.
Product information
Vitocal 300-G/W Pro SPS
Heat pump Vitocal 300-G Pro SPS, type
BW Vitocal 300-W Pro SPS, type
WW
Medium Brine/water Water/water
Single stage heat pumps 301.BS090
301.BS120 301.BS125
301.BS155
2-stage heat pumps 302.BS090
302.BS120
302.BS150
302.BS180
302.BS250 302.BS125
302.BS155
302.BS200
302.BS250
302.BS300
Characteristics:
■ Integral heat pump control unit Vitotronic SPS,
type SAIA
■ The refrigerant circuit has an electronic expansion
valve (EEV) with an integrated refrigerant circuit con-
troller in the SPS
■ The Vitotronic SPS can control up to 3 heating/cool-
ing circuits with mixer
■ All sensors are fitted inside sensor wells, with the
exception of the suction gas sensor
■ External heat generators can be switched, such as
oil or gas burners as emergency or dual mode heat
sources.
An increased output in connection with additional
Vitocal 300-G Pro SPS/Vitocal 300-W Pro SPS (cas-
cade) is possible. 2 heat pumps can be linked in a cas-
cade; see pages 54, 61 and 66.
General information on electrical connection
■ Electrical connection of system components
(pumps, mixers, valves, message facilities, contac-
tors, function extensions, sensors etc.):
Connections are made inside the heat pump wiring
chamber. Observe information from page 29.
■ Power supply:
The number of power cables from the meter box to
the heat pump wiring chamber depends on the sys-
tem version and tariffs used. See information from
page 37.
Preparing for installation
Use
5549 991 GB
Installation