Viega Profipress G XL, Инструкция по эксплуатации, Страница: 9 / 23

Use is possible in the gas installations described below:
n
Gas installations
– low pressure range
≤
100 hPa (100 mbar)
– medium pressure range from 100 hPa (100 mbar) up to 0.1 MPa (1 bar)
– industrial, commercial and process technical systems with the
corresponding directives and technical regulations
n
Liquid gas systems
– with liquid gas tank in medium pressure range downstream of
the pressure regulating valve, 1st level on the
liquid gas tank > 100 hPa (100 mbar) up to a permitted operating
pressure of 0.5 MPa (5 bar)
– with liquid gas tank in the low pressure range
≤
100 hPa (100 mbar) behind the pressure regulating valve, 2nd
level
– with liquid gas pressurised container (liquid gas bottles) < 16 kg
behind the small bottle pressure regulating valve
– with liquid gas tank (liquid gas bottle)
≥
16 kg
behind the large bottle pressure regulating device
The Sanpress Inox G system must be used for liquid gas
installations in areas with requirements of higher thermal
resistance (HTR), with a pick-up pressure of the
SSV > 0.1 MPa (1 bar).
2.2.2 Media
The system is suitable for the following media, amongst others:
For the applicable directives, see Ä
„Regulations from section:
Media“ on page 6.
n
Gases
n
Liquid gases, only in the gaseous state for domestic and commercial
applications
n
Compressed air
2.3 Product description
2.3.1 Overview
The piping system consists of press connectors for copper pipes and
the corresponding press tools.
Product information
Profipress G XL 9 from 23