Secure the pipe in the vice.
When securing, leave an interval of at least 100 mm (a) to the pipe
end.
The pipe ends must not be bent or damaged.
Deburr the inside and outside of the pipe.
3.4.3
Pressing the connection
Requirements:
n
The pipe end is not bent or damaged.
n
The pipe is deburred.
n
The correct sealing element is in the press connector.
HNBR = yellow
n
Sealing element, separator ring and cutting ring are undamaged.
n
The complete sealing element, separator ring and cutting ring are in
the bead.
Measure insertion depth.
d [mm]
Insertion depth [mm]
64.0
43
Handling
Profipress G XL
20 from 23