n
LED
„Throughflow“ lights up.
n
The light of the LEDs goes out in the same sequence.
The LED "Function" emits light:
n
red - Malfunction is pending, e.g. magnet defective, see
3.5.2 „Troubleshooting“ on page 53.
n
green – Normal operation
3.3.6
Notes on wall installation
After mounting, be sure to place the protective cardboard box back
over the device.
It fulfills the following functions during the construction phase:
n
It protects the flush valve from damage and dirt.
n
The next technical crews (e.g. dry construction, tilers) must work up
to the outer edges of the protective cardboard box.
Rotate the protective cardboard box by 180° (sits tighter this way)
and place it over the device.
ð
The protective box ensures that the internal area of the base
will not be obstructed and that there will be no problems with
the subsequent installation of the concealed-mounting cover.
Make sure the next technical crews are aware of the fol-
lowing conditions:
–
The next wall installations (dry construction, plastering
and tiling work) must not proceed beyond the protective
cardboard box.
–
The wall installation from the front edge of the base until
the top edge of the finished wall must have a maximum
thickness of 50 mm. Otherwise, professional mounting of
the concealed-mounting will be impossible.
3.3.7
Mounting the cover
LED
"
Function
"
Fig. 19: Protective cardboard box
Concealed-mounting cover
Handling
Flush valve universal
41 from 62
