Go to [Test flushing] to manually open the magnet valve. Now, you can
use a multi-functional sensor to monitor the flow by way of the tempera‐
ture change, or – if a flow sensor is connected – directly observe the
flowthrough volume to adjust a temperature-controlled flush stop to the
conditions on site.
If no flow sensor is installed, the flowthrough volume will be computed.
After the test flushing, the measured values can be output as a .csv file
and / or deleted.
The data of the test flushing are deleted when you exit the
screen. Perform the .csv export before adjusting the stop
condition.
Fig. 14: Start function test
For a functionality test, only the connected and enabled components
are shown.
Test flushing
Functionality test
Handling
Flushing station with Viega technology
55
