To complete initial commissioning, confirm or adjust the flushing set‐
tings.
▶
Use the arrow keys to program the settings.
▶
Press
✓
or X to move from digit to digit / value to value.
▶
After setting the cutoff time, press
✓
to confirm and save the entry.
After commissioning, the control can only be set by
means of an interval-controlled flushing which can only be
stopped according to the 'flush volume' criterion.
After commissioning, check whether a software update is
available. If so, install it immediately.
3.4.3
Configuring the flushing station
Via the web application, the following settings can be made:
With short intervals or large flush volumes, there is the risk
of condensate formation and possibly risks to masonry /
building.
Start options
n
Start flushing – pursuant to interval
If this option is selected, flushing will always be performed automati‐
cally after expiry of an interval specified by the operator. The interval
can be set, accurately to the hour, between 1 and 168 hours. The
time of day entered here is the time of the first flushing triggered by
the system. The cutoff times are taken into consideration as well,
and flush actuation is performed only after the end of the cutoff time.
If a flushing is scheduled during a cutoff time, it will be
performed after the end of the cutoff time. The interval will
start anew at this point in time.
Programming the flushing set‐
tings
Setting the flushing intervals
Handling
Flushing station with Viega technology
41
