14 - RJ-45 interface for network or Internet connection
15 - Connection for magnet valve flushing section (red)
16 - Connection for multi-functional sensor flushing section (red)
17 - Connection for the BMS module
18 - LED indicator for WIFI status
1 - Potential-free contact max. 24 VDC, 0.5 A
2 - Potential-free contact max. 24 VDC, 0.5 A
3 - Reset OUT 24VDC
4 - Reset IN 24VDC
5 - Alarm-Out 12 VDC (power supply via control)
6 - Alarm-Out GND (power supply via control)
The external sensor (2241.62) can be connected to the control by
means of the Phoenix terminal. If you use an external power supply, ter‐
minals 1 and 2 must be assigned. To connect the external sensor to
them, you may need an additional relay as the terminal is currentless
open.
If the external sensor is to be supplied via the control of the flushing sta‐
tion, terminals 5 and 6 must be assigned.
Whether you used a relay or not, please ensure to connect the external
sensor in such a way that the assignment described below is present.
▶
Connect the white cable to terminal 1 for a light signal.
▶
Or connect the red cable to terminal 1 for a light and sound signal.
▶
Connect the external power max. 24V/0.5A to terminal 2.
▶
Connect the black external sensor cable to the earth (GND) of the
external power supply.
▶
Connect the white cable to terminal 5 for a light signal.
▶
Or connect the red cable to terminal 5 for a light and sound signal.
▶
Connect the black cable to terminal 6.
Terminal assignment with potential-free contacts
A
la
rm
m
a
x
.2
4
V
/0
.5
A
R
e
s
e
t
IN
5
-2
4
V
R
e
s
e
t
G
N
D
A
la
rm
O
U
T
1
2
V
/m
a
x
0
.2
A
A
la
rm
G
N
D
Connecting the external sensor
External sensor with external
power supply
"&
"&
3PVU 3JO "MPVU"M(/%
7
6
7"
4JHOBM
External sensor with power
supply via the flushing station
"&
"&
3PVU 3JO "MPVU"M(/%
6
7JFHB4JHOBM
#MJU[
Handling
Flushing station with Viega technology
33
