ENUK - V1.4 - 25/01/17
32
4000 Series GSM Audio Intercom - Technical Manual
4000 Series GSM Audio Intercom with Proximity
Programming the GSM Intercom
PROGRAMMING THE GSM INTERCOM
Programming the GSM PRO intercom can be carried out in two ways, either by sending text (SMS) messages or by using the GSMSK
PC software (ver 3.0.0.2 or later).
IMPORTANT NOTE: When you are required to use “ in a text message it is very important to use the correct symbol and not for
example ‘ (or two ‘ single apostrophes side by side which you will see look the same but will be interpreted differently by the
GSM PRO intercom panel).
PROGRAMMING BY TEXT MESSAGE
Programming by text message is a simple way to customise the settings of the GSM PRO intercom panel and add or delete telephone
numbers. If you have a large number of buttons or telephone numbers to enter you may find programming easier with the GSMSK
PC software. Simply send texts in the following format shown below to the telephone number of the SIM within the GSM PRO
intercom panel:
<4 DIGIT CODE> <3 DIGIT FUNCTION CODE> <OPTIONAL DATA> <OPTIONAL ?>
4 DIGIT CODE
This code prevents unauthorised access to the programmable features of the system. The code
must be four digits long but can be any combination using digits 0 – 9. The default code is 1111
and will be used for all examples in this manual.
3 DIGIT FUNCTION CODE
The 3 digit function code identifies the programmable feature to be changed. The code must
be in capital letters. The following table lists the available codes.
DESCRIPTION
CODE
EXAMPLE
SETTINGS
DEFAULT
PAGE
Store a primary telephone no.
STN
1111STNnnn”01912243174”
nnn = 001 - 050
n/a
33 - 34
Store divert 1 telephone no.
STD
1111STDnnn”01912241559”
nnn = 001 - 050
n/a
33 - 34
Store divert 2 telephone no.
STE
1111STEnnn”01912243678”
nnn = 001 - 050
n/a
33 - 34
Store divert 3 telephone no.
STF
1111STFnnn”01912245326”
nnn = 001 - 050
n/a
33 - 34
Store dial to open no.
STR
1111STRnnn”07771234567”
nnn = 000 - 999
n/a
34
Set call time
SPT
1111SPTnn
nn = 01 - 12
02
(40s)
34
Set relay time
RLT
1111RLTnn
nn = 00 - 99
05
(5s)
34
Set auxiliary AO1 output time
A1T
1111A1Tnn
nn = 00 - 99
05
(5s)
35
Set auxiliary AO1 out mode
A1M
1111A1Mnn
nn = 00 - 05
01
35
Set auxiliary AO2 output time
A2T
1111A2Tnn
nn = 00 - 99
05
(5s)
35
Keep connection facility
NOD
1111NODnn
nn = 01 - 99
0
(disabled)
35 - 36
Divert to next no. time
DIT
1111DITnn
nn = 01 - 99
15
(15s)
36
Check GSM signal strength
SIG
1111SIG?
n/a
n/a
36
Check software version
VER
1111VER?
n/a
n/a
36
Dial a number
DLE
1111DLE”123”
n/a
n/a
36
Store SMS message for g-4
SMS
1111SMS”HouseAlarm”
n/a
AUX TRIG
36
Change 4 digit code
CDE
1111CDE1234
Any 4 digits
1111
37
Trigger the relay
RLY
1111RLY
n/a
n/a
37
Trigger the auxiliary output AO1
A1O
1111A1O
n/a
n/a
37
Trigger the auxiliary output AO2
A2O
1111A2O
n/a
n/a
37
Store balance check dial string
SDL
1111SDL”*#1345#”
n/a
n/a
37
Check credit balance
BAL
1111BAL?
n/a
n/a
37 - 38
Store master telephone no.
STM
1111STM”07771234567”
n/a
n/a
38
Latch the relay
RLA
1111RLA
n/a
n/a
38
Unlatch the relay
RUL
1111RUL
n/a
n/a
38
Latch the auxiliary AO1 output
A1L
1111A1L
n/a
n/a
38
Unlatch the auxiliary AO1 output
A1U
1111A1U
n/a
n/a
38
Latch the auxiliary AO2 output
A2L
1111A2L
n/a
n/a
38
Unlatch the auxiliary AO2 output
A2U
1111A2U
n/a
n/a
39
