Videotec MAXIMUS MVX, Инструкция по эксплуатации

Страница: 17 / 256

Instruc
tion manual - English - EN
15 MNVCMVXCAM_1645_EN
6.1.5.1 Advanced Setting Menu
From this menu it is possible to configure the camera
settings in more detail.
1.
Zoom: Allows access to the Zoom submenu.
2. Focus: Allows access to the Focus submenu.
3.
Exposure:
Allows access to the Exposure.
4. Infrared: Allows access to the Infrared
submenu.
5. White Balance: Allows access to the White
Balance submenu.
6. Other: Allows access to the Other submenu.
ADVANCED
------------------------
1>ZOOM >
2 FOCUS >
3 EXPOSURE >
4 INFRARED >
5 WHITE BALANCE >
6 OTHER >
Fig. 20
6.1.5.2 Advanced Setting Menu (Zoom)
1. Zoom Speed : Sets the speed of the zoom. The
speed ranges between 0 (minimum speed) and
7 (maximum speed).
2. Digital Zoom : Enables the digital zoom.
ZOOM
------------------------
1>ZOOM SPEED : 7
2 DIGITAL ZOOM : N
Fig. 21
6.1.5.3 Advanced Setting Menu (Focus)
It allows you to configure the following parameters:
1.
Focus Speed: Sets the speed of the Focus. The
speed ranges between 0 (minimum speed) and
7 (maximum speed).
2. Autofocus: Enables or disables the autofocus.
When on, it is to automatically load Autofocus
at any positioning or movement of the zoom,
depending on the selected operating mode.
3. Autofocus Type: Sets the type of Autofocus. The
possible values are:
•
Normal: Autofocus is always enabled.
• Interval: The autofocus function is activated
at regular intervals. The Interval is set every 5
seconds.
• Trigger: Autofocus recall on each position
or movement of the zoom. This is the
recommended solution.
4. Sensitivity: Sets the level of sensitivity. The
possible values are:
•
Normal: Focusing at the highest possible
speed. This is the recommended solution.
• Low: Slowed-down focusing. It is useful in
case of dim lighting as it makes the image
more stable.
FOCUS
------------------------
1>FOCUS SPEED : 2
2 AUTOFOCUS : N
3 AUTOFOCUS TYPE:TRIGGER
4 SENSITIVITY : NORMAL
Fig. 22