CMOR Dome
Videoswitch Page
9
Vc607a.doc
4 Menus
4.1 Menu Navigation
4.1.1 Entering
Menu
Different keyboards have different ways of entering the menu system of a dome. Refer to
specific keyboard manual for details.
Common examples are:
•
Videoswitch Vi-K2
Press DOME then press MENU
•
Videoswitch Vi-K3
Press and hold ALT then press DOME MENU
•
BBV (TX400)
Press and hold SHIFT then press 1
•
Pelco (KBD400A)
Enter 95 then press and hold PRESET key
•
Dedicated Micro DS2
Press and hold * 8,8,910,10,2
4.1.2 Moving
cursor
Once in the menu, the joystick may be used for LEFT, RIGHT, UP and DOWN control of the
cursor. On a Videoswitch keyboard, the cursor keys can also be used.
•
UP
move the cursor up, or change a value
•
DOWN
move the cursor down, or change a value
•
RIGHT
move the cursor right, or enter a sub-menu
•
LEFT
move the cursor left, or exit a sub-menu. When editing a
title, you may need to go LEFT several times to exit
4.1.3 Select
Use of Select is not necessary – if there is no joystick movement and no key is pressed for 5
seconds (programmable), the dome will automatically issue a select command, for example
to save a preset or mask.
If you wish to issue a Select command to avoid having to wait, the required key depends on
the type of keyboard.
Common examples are:
•
Videoswitch Vi-K2
-
Press OK
•
Videoswitch Vi-K3
-
Press OK
•
BBV (TX400)
-
Press 1
•
Pelco (KBD400A)
-
Enter 96 then press and hold PRESET key
•
DS2
Press
Preset,10, then preset number e.g.1,2
4.1.4 Cancel
Use of Cancel is not essential, but can be used to quit a preset without setting it. This also
depends on the type of keyboard.
Common examples are:
•
Videoswitch Vi-K2
-
Press BACK or WASH
•
Videoswitch Vi-K3
-
Press ALT and ESC
•
BBV TX400
-
Press WASH
•
Pelco
-
Enter 97 then press and hold PRESET key