CMOR Dome
Videoswitch Page
1
Vc607a.doc
1 Installing the Dome
1.1 Vi-B2 Wall Bracket
The wall bracket allows the dome to be mounted to a vertical wall. The wall bracket may
also be used in conjunction with the Vi-B5 corner adaptor and the Vi-B6 pole adaptor for
mounting the dome on the corner of a building or on a pole.
1.1.1 Fixing
the
mounting plate
•
Fix the mounting plate to the wall (or corner or pole adaptor), using four screws (A)
of adequate size and strength to support the weight of the dome.
•
Fit the umbilical cable, entering either through the mounting plate or via a knockout
in the bottom of the plastic bracket covers.
1.1.2 Securing the bracket
•
Secure the bracket to the mounting plate using the 4 nuts supplied (C)
•
For safety reasons, at least one of the fixing screws
must have washer
fitted (D).
•
Position the umbilical cable (E) such that the connector (F) is above the dome
support cradle (G)