9
2.2
Side Panel
This series analog camera side panel structure is shown as below. See Figure 2-3.
1: Flange-back. 2. Auto aperture port 3.Pedestal to secure the bracket
Figure 2-3
1 Flange-back
Usually the flange-back has been set to the proper position before it is shipped out of the factory.
But sometimes, you may still need to adjust a little bit to let it be suitable for different lens. Please
follow the steps listed below:
z
Secure the lens.
z
Loosen the screw to unlock the flange-back
z
Turn the lens until you see the clear video.
z
Fix the screw again.
2. Auto aperture port
The auto aperture port interface is shown as below. See Figure 2-4.
Figure 2-4
