18
z
Detect sensitivity: The value ranges from 000 to 127. Please use the left/right button to set.
z
Block: display: The parameter includes on, off, set
. Click the set button; you can use the
direction buttons to set the area to display the block.
z
Monitor area: The parameter includes on, off.
z
Area selection: The value ranges from 1/4 to 4/4. Please use the left/right button to set.
System max supports 4 areas. You can use the up/down/left/right button to set.
z
Top: The value ranges from 000 to 288. Please use the left/right button to set. Button: The
value ranges from 000 to 288. Please use the left/right button to set. Left: The value ranges
from 000 to 288. Please use the left/right button to set. Right: The value ranges from 000 to
288. Please use the left/right button to set. (Note: This function is invalid when the digital
image stabilization (DIS) function is on.
3.3.8 PRIVACY
MASK
The parameter includes on, off
.
Select the on button and then click the confirm button, you can go to the sub-menu.
PRIVACY
AREA SEL
1/4
MODE
ON
POSITION
COLOR RED
TRANP 0.05
MOSAIC OFF
RETURN
z
Area selection: The value ranges from 1/4 to 4/4. Please use the left/right button to set.
System max supports 4 areas. You can use the up/down/left/right button to set.
z
Top: The value ranges from 000 to 288. Please use the left/right button to set.
z
Bottom: The value ranges from 000 to 288. Please use the left/right button to set.
z
Left: The value ranges from 000 to 468. Please use the left/right button to set.
z
Right: The value ranges from 000 to 468. Please use the left/right button to set.
z
Color: The value ranges from 1 to 8. Please use the left/right button to set.
BLACK,RED,GREEN,BLUE,
z
Transparent: The parameter includes: 0.00, 0.50, 0.75, and 1.00.
z
Mosaic: The parameter includes on, off.
3.3.9 DAY/NIGHT
The function can become valid from the external activation. This function is enabled when the IR
light on if the D/N port in the rear panel can output the 5V high-level IR light. In this way, the
device realizes the day/night mode switch.
The parameter includes: auto
, color, black and white
,
and external-trigger.
Auto
DAY/NIGHT MODE
BURST ON
DEALY CNT
003
DAY
→
NIGHT 001
NIGHT
→
DAY 007
RETURN
