11
Please refer to the following sheet for detailed information.
1
Menu button
Press it for two seconds to call the menu. Use the
up/down button to move the function and use the
left/right button to select the item.
2 Power
indication
light
It is the power indication light. The LED light is on
when the power supply is proper.
3
Video output
It is to output analog video signal.
4
Power
“+” is to connect to the positive end.
“-” is to connect to the negative end.
“
” is the ground end.
A,B
Support RS485 control. Can connect to the DVR,
keyboard and etc to realize remote control.
G,D/N
It is the input port for the device (such as the IR light)
to confirm the day/night environment so that the device
can realize the day/night switch.
5
NC, NO
Connect to the external alarm device.
Important
Please refer to the specifications sheet for power voltage and working environment
information.
Installation
Important
z
Please make sure all the accessories are included.
z
Please make sure the lens is the CS model and it is less than 1Kg.
z
The jut after the installation section shall be less than 5mm.
z
Please use the C/CS mount adapter when you are using C model lens.
2.4
Installation
This series camera support two installation modes: wall mount and in-ceiling mount.
All the steps listed below are based on the in-ceiling mount. The wall mount installation is the
same.
Step 1
Please select the corresponding installation bracket before your installation.
If it is the cement wall, please install the expansion bolt first. Please make sure the expansion
bolt installation position shall be identical with the bracket. Then you can install the bracket. See
Figure 2-6.
If it is the wood wall, you can use the self-tapping bolt to install the bracket directly.
Important
Please make sure the installation surface can min support the 3X weight of the camera and the
bracket.
