12
Figure 2-6
Step 2
Install the camera. Please use the installation pedestal at the top of the camera to turn the
camera into the bracket.
Step 3
After adjust the camera to proper surveillance position, secure the knob of the bracket to fix the
camera.
Step 4
Install the lens to the camera head. Adjust the focus and then secure the lens. See
2.5
Hardware Installation
Please refer to the following figure for rear panel connection. See
Error! Reference source not
found.
.
Important
Before you boot up the camera, please make sure the provided power voltage is conform to the
camera specifications. Usually the analog camera voltage is DC 12V or AC 24V.
