Connect the Cables and Power Supply
1.)
First connect the power supply to the jack
on the base of the camera. Then connect the
wall plug cable to the power supply brick. Plug
into a wall outlet. The camera should power
up immediately.
NOTE:
Use both hands when-
ever adjusting the
neck of the camera;
this will avoid any un-
necessary strain on
the camera’s base
and will keep the
camera from tipping
over unexpectedly.
5.)
Position camera head. The head rotates
forward and back and spins in its bracket to
allow use as a document camera or as an aux-
iliary camera for presentation viewing.
•
For document viewing
, spin the camera
Figure 2 – Unscrewing
the camera’s lens.
head so the arrow is pointing down and pivot
the camera head down to face the document.
The lens will focus automatically.
4
•
For use as an auxiliary
camera
, spin the camera
head so the arrow is
pointing up. Then pivot
the head to face the sub-
ject.
Unscrew the close-up lens
and store it in the receptacle
on the camera’s base.
Figure 3 – The DocCam Pro VC’S backplate.
VIDEO
GRAPHICS
INPUT
LEFT
VIDEO
OUT
RIGHT
VIDEO
OUT
COMPOSITE
VIDEO
OUT
S-VIDEO
OUT
12V
CENTER
POSITIVE
POWER IN
•
•
•
•
•
•
•
•
•
•
•
•
