Recording of the proximity reader
The alarm panel must be put in "Recording device mode", and
the keypad must display“
PRESS PROGRAM BUTTON OF
DEVICE
”.
Fix the base with marks «TOP-HIGH», upwards.
Fix the screw under the base matter part, so
that the arming to be operational.
Insert, the first
(lithium battery
LS14500)
, wait for 2 beeps of the reader then insert the
2 other batteries
(in the same direction)
.
Press the PROGRAM Button, release as soon as the
indicator flashes.
Allocate a zone (with the keypad direction arrows),
validation by the touch [YES].
Give it a name and validate with the [YES] key.
Mocate “TOP-HIGH”
2 screws for fixing
Description
The proximity reader can be placed in the interior or exterior
because the electronic card is weather proof. This device is used
for arming and disarming a VIDEOFIED
®
system. The recording
of the badge reader in a recording area makes that area and all
devices in that area subject to the entry and exit delays.
Characteristics
It is possible to record 19 badges, each badge takes the position
of a user code. Example : 5 badges re 4 keypad user
codes, remaining 10 codes and/or badges available.
In order to read the badge, the badge must be placed in contact
with the reader surface for approximately half a second (a beep
is emitted when the badge is read).
Remark : The total starting up and stopping are handled by the
badge readers ...
Magnet for
tamper open on
the reader
Wall tamper
punch out
Base to be fixed
PROGRAM Button
Surface of the
badge reader
Fixing point of the protection against
opening and pulling out
1
2
3
4
5
Indicator LED
BR means BR650 for USA/Canada, BR750 for Australia/Singapore and
BR250 for Europe and rest of the world.
www.videofied.com
I N S T A L L A T I O N D A T A S H E E T
Proximity Reader
BR
Made by RSI VIDEO TECHNOLOGIES
The recording of the badge reader in a
geographical recording area temporizes
the latter.
1
