Vidalux Essence Range, Инструкция по установке и эксплуатации

Страница: 21 / 38

19
GLASS SHELF
Assemble the shelf fully before fi tting into the shower.
Position the lower chrome rail over the holes in the glass on the underside of the shelf with the silver
grommets positioned between the two.
On the upper side of the glass, pass the bolt through a washer and through the hole in the glass and
fasten into the end of the lower rail.
Repeat the previous step on the other end of the lower rail so that the rail is securely fi xed in place.
Take the two silver caps and fi t them over the ends of the washer and bolt to provide a clean fi nish.
The upper rail pushed over the glass from the front. Using a fl at head screwdriver, tighten up the fi xing
point of the front rail, which is located on the underside.
Position the two fi xing brackets onto the inside of the rear panel of the shower in the holes provided. Fix
the brackets at the rear of the shower with the supplied bolts and washers.
Place the glass of the shelf centrally into the slots of the brackets and then tighten the fi xing points
on the underside of the brackets to hold the shelf in place. DO NOT OVER TIGHTEN THE BRACKET
CONNECTIONS AS THIS MAY BREAK THE GLASS.