In order to edit/configure 'advanced settings':
a. Select the 'Battery preset' dropdown arrow to expand the menu, then select ‘User defined'.
b. ‘User defined' configuration will now be enabled.
The settings in the 'advanced menu' (with 'expert mode' disabled) include:
a.
Maximum charge current
The maximum charge current setting allows selection between the default and a significantly reduced charge current limit
preset; Maximum, Low or Minimum current (current limits vary per model - refer to the 'Specifications' section for more
information). Alternatively a user defined maximum charge current (between the minimum and maximum limits) can be
configured.
b.
Battery preset
The ‘Battery preset’ dropdown allows selection from the following options:
i.
Built-in preset
Selection of a standard integrated pre-set (same as the general settings menu)
ii.
User defined
Reselection of the last ‘user defined’ charge settings
iii.
Select preset
Selection from an extended range of integrated battery charging pre-sets, including new user defined charging pre-sets
iv.
Create preset
A new charging preset to be created and saved from user defined settings
v.
Edit presets
An existing preset to be edited and saved
c.
Charge voltage
The charge voltage settings enable the voltage setpoint for each charge stage to be independently configured and some
charge stages (recondition and float) to be disabled or enabled.
The charge voltage setpoint for the following charge stages can be configured:
i.
Absorption
ii.
Float
iii.
Storage
iv.
Recondition
Phoenix Smart IP43 Charger
Page 50
Advanced Configuration
