a.
Charge cycle statistics
i.
Cycle overview
Expandable bar chart showing the time spent in each charge stage and the charge capacity provided (in Ah) during each
charge stage
ii.
Status
Confirms if the charge cycle was successfully completed or if it was ended early/interrupted for some reason, including
the reason/cause
iii.
Elapsed
The elapsed/total charge cycle time
iv.
Charge
Total capacity provided during the recharge stages (Bulk and Absorption)
v.
Maintain
Total capacity provided during the charge maintenance stages (Float, Storage and Refresh)
vi.
Type
The charge cycle mode used; either a ‘Built-in preset’ or a custom ‘Userdefined’ configuration
vii.
Vstart
Battery voltage when charging commences
viii.
Vend
Battery voltage when charging is complete (end of absorption stage)
ix.
Error
Displays if any errors occurred during the charge cycle, including the error number and description
b.
Charger lifetime statistics
i.
Operation time
The total operation time over the lifetime of the charger
ii.
Charged Ah
The total charge capacity provided over the lifetime of the charger
iii.
Cycles started
The total charge cycles started over the lifetime of the charger
iv.
Cycles completed
The total charge cycles completed over the lifetime of the charger
v.
Cycles completed %
The percentage of charge cycles completed over the lifetime of the charger
vi.
Number of power-ups
The number of times the charger has been powered up over the lifetime of the charger
vii.
Number of deep discharges
The number of times the charger has recharged a deeply discharged battery over the lifetime of the charger
Phoenix Smart IP43 Charger
Page 48
Monitoring
