Victory Motorcycles Cross Country 8-Ball 2015 Скачать руководство пользователя страница 152

Страница: 152 / 160

150

Cross Country MAGNUM Audio System

Audio Mode Menus

Bluetooth Driver Device

1. Press

to turn the Driver

Bluetooth Device source ON or OFF.

2. Press and release

to move to the

next selection.

NAV Audio

1. Press

to turn the NAV

Audio source ON or OFF.

2. Press and release

to move to the

next selection.

iPod Music Menu

The iPod music menu allows the user to set
how the device plays music tracks using the

buttons. Four options are

provided:

• Default - No changes from device’s current

settings

• Shuffle Off - Forces shuffle feature off and

plays in playlist/album order or alphabetical
order. Playlists are in an order prearranged by
the user or device.

• Shuffle Tracks - All tracks are randomized

• Shuffle Albums - Randomizes albums, but

plays each track in album’s order

1. Press

to scroll and select

one of the available iPod Music modes.

• DEFAULT

• SHUFFLE OFF

• SHUFFLE TRACKS

• SHUFFLE ALBUMS

2. Press and release

to move to the

next selection.

Содержание Cross Country 8-Ball 2015

































































































































































Результаты поиска

Содержание Cross Country 8-Ball 2015

Отзывы:

Похожие инструкции для Cross Country 8-Ball 2015

Бренды по названию

Популярные бренды

Victory Motorcycles Cross Country 8-Ball 2015, Руководство пользователя

Результаты поиска

Содержание Cross Country 8-Ball 2015

Отзывы:

Похожие инструкции для Cross Country 8-Ball 2015

Бренды по названию

Популярные бренды