76
Co
ntro
ls
Instruments/Features/Controls
Pedal Adjustment
The brake pedal and gear shift pedal controls can be
adjusted to a front, rear or center position. The center
position is the factory setting.
1. Remove the screw from the footwell support.
Tool:
6 mm Allen wrench
2. Slide the control forward or rearward in its track until
the threaded hole of the control aligns with the
desired hole in the footrest support.
3. Reinstall the screw.
Torque: 96 in-lbs (11 Nm)
4. After adjusting the shift pedal, always readjust the
shift linkage rod. Loosen both jam nuts on the linkage
and turn the shaft until the footpeg is about 90 mm
from the floorboard (or to desired height). Tighten
both jam nuts.
Torque: 96 in-lbs (11 Nm)
Center Adjustment
Position
9922671.book Page 76 Tuesday, June 16, 2009 12:06 PM
