Victaulic VG412, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 46

VG412
8
CONTAINER CONTENTS
1. Hinged main frame with gear plate halves installed. (Note: weight = 138 pounds (63Kg).
2. Motor, footswitch, power cord with plug assembly.
3. Motor mount and mounting hardware.
4. Cutoff blades.
5. Grooving bits for 4"- 6" D.I. and 8" - 12" D.I., one set each.
6. Tool stand with four legs.
7. Riser blocks for 6" - 10" D.I. (12" mounted on frame)
8. One cutoff blade assembly.
9. Two grooving blade assembly.
10. One 4" cutoff/groove component kit.
11. One set D.I. rigid groove spacer blocks.
12. Two tool operating and maintenance manuals.
TOOL RATING
The standard VG 412 tool is supplied with the necessary components to cut off and cut groove 4" - 12"
D.I. pipe with rigid grooves for use with Victaulic grooved piping products for AWWA ductile piping.
For grooving to other specifications and other materials, see tool bit selection chart on page 38.
Component parts for other materials must be purchased separately.