Victaulic VE26 Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 26 / 44

8. Advance the grooving roll by turning the feed
nut clockwise . Refer to the “VE26 Feed Rates”
table that follows . NOTE: Feed rates for VE26
tools vary depending upon the pipe/tubing
material and wall thickness . DO NOT exceed the
feed rates listed in this table .
VE26 FEED RATES
Tools
Pipe
Material
Wall
Thickness
inches/mm
Recommended
Turns of
Feed Nut to
Advance the
Grooving
Roll
VE26S
VE26SS
Steel and
Stainless
Steel
0.135 – 0.216
1/4 turn
3.4 – 5.5
0.120 – 0.134
1/3 turn
1.7 – 3.0
0.065 – 0.119
1/2 turn
1.7 – 3.0
VE26P Aluminum
0.135 – 0.216
1/3 turn
3.4 – 5.5
0.120 – 0.134
1/2 turn
3.1 – 3.4
0.065 – 0.119
2/3 turn
1.7 – 3.0
VE26P
PVC
Plastic
0.154 – 0.258
3/4 turn
3.9 – 6.6
VE26C
VE26EC
VE26AC
Copper
0.126 – 0.192
1/2 turn
3.2 – 4.9
0.073 – 0.125
2/3 turn
1.9 – 3.2
0.042 – 0.072
3/4 turn
1.1 – 1.8
9.
Set the groove depth by referring to the
“Groove Depth Adjustment” section .
10.
Depress and hold down the safety foot-
switch pedal . The pipe/tubing will begin to rotate
clockwise
. As the pipe/tubing rotates, begin
the grooving process . Using the hand crank
supplied with the tool, advance the grooving roll
by turning the feed nut
clockwise
. Refer to the
table above for the recommended number of
turns of the feed nut .
NOTE:
A ratchet with a
11/4-inch (32-mm) socket (not supplied) may be
used in place of the hand crank .
TM-VE26_26 REV_C
TM-VE26 / Operating and Maintenance Instructions Manual