Victaulic RG1200, Инструкция по эксплуатации и техническому обслуживанию

Страница: 11 / 24

POWER DRIVE SETUP
DANGER
• DO NOT connect electrical
power until instructed
otherwise.
Failure to follow this instruction
could result in serious personal
injury.
The RG1200 tool can be attached to a power
drive using the provided drive shaft adapter .
If necessary, contact Victaulic for more
information on the optional power drive height
adjustment bracket .
1. Remove all components from the packaging,
and ensure that all necessary items are
included . Refer to the “Receiving the Tool”
section .
2.
Select a location for the power drive and tool
by taking into consideration the following factors:
a. The required power supply (refer to the
power drive manufacturer’s instructions)
b. Adequate space to handle pipe lengths
c.
A firm and level surface for the power
drive
d. Adequate clearance around the tool for
adjustment and maintenance
3. Using a flat-head screwdriver, remove the
caps on the support arm ports .
4.
Screw the support arms into the ports until
hand-tight . Do not overtighten .
5. Insert the power drive adapter into the power
drive until the adapter collar meets the drive
collet .
6. Insert the tool drive shaft into the power drive
adapter until the tool body meets the adapter .
11 REV_D
TM-RG1200 / Operating and Maintenance Instructions Manual