INTRODUCTION
NOTICE
• Drawings and/or pictures in this manual
may be exaggerated for clarity.
• The tool, along with this operating
and maintenance instructions manual,
contains trademarks, copyrights, and/or
patented features that are the exclusive
property of Victaulic.
The RG3212 is a hydraulic feed tool for roll
grooving pipe to receive Victaulic grooved pipe
products . The standard RG3212 tool is supplied
with grooving rolls for 2–12 inch/50–300 mm
steel pipe . Rolls are marked with the size and
part number, and are color coded to identify the
pipe/tubing material . For roll grooving to other
specifications and materials, refer to the “Tool
Rating and Roll Selection” section . Grooving
rolls for other specifications, sizes, and materials
must be purchased separately .
CAUTION
• The RG3212 should only be used for roll
grooving pipe designated in the “Tool
Ratings for Steel Pipe” section of this
manual.
Use of the tool for other purposes, or use
exceeding the pipe thickness maximums,
will overload the tool, shortening tool life
and potentially causing tool damage.
RECEIVING THE TOOL
RG3212 tools are packed individually in sturdy
containers that are designed for repeated
shipping . Save the container for return shipment
of rental tools .
Upon receipt of the tool, ensure that all
necessary parts are included . If any parts
are missing, contact Victaulic .
CONTAINER CONTENTS
Qty.
Description
1
Tool with Motor and Hydraulic Pump Handle
1
Foot Switch
1
PS3212 Pipe Stand
1
Roll Set for 2–3.5-inch Steel Pipe -
Original Groove System Specification
1
Roll Set for 4–6-inch Steel Pipe -
Original Groove System Specification
1
Roll Set for 8–12-inch Steel Pipe -
Original Groove System Specification
1
Lower Roll Removal Wedge
1
Go/No-Go Grooved Pipe Diameter Tape
1
Storage Bag with Accessories
2
Operating and Maintenance Instructions Manual
6
REV_C
TM-RG3212
/ Operating and Maintenance Instructions Manual
