20
Maintenance of the Spark Plug
Check the spark plug for carbon deposits after 10 hours of operation and if necessary clean.
Thereafter service the spark plug after every 25 hours of operation.
1.
Pull off the spark plug boot by twisting side to side gently.
2.
Remove the spark plug with the supplied spark plug tube spanner.
3.
Assemble in reverse order.
2.
1.
Champion RCJ6Y Spark plug gap = (0.6 - 0.7 mm).
Tighten the spark plug with a torque of 15 - 22 Nm.
0.7mm
Maintenance & Storage
Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition.
Check the blower frequently for wear or deterioration.
Replace worn or damaged parts.
Use only genuine replacement parts and accessories.
Store the appliance only in a dry place.
MAINTENANCE SAFETY
• Stop the engine and disconnect the spark plug H.T. lead before clearing blockages,
checking or working on the unit.
• Stop the engine, disconnect the spark plug H.T. lead and inspect the unit if it begins
to vibrate abnormally.
• Use only genuine VICTA replacement parts.
CLEARING AN INLET BLOCKAGE
Foreign material may cause a blockage in the inlet chute of your blower vac. Ensure the
impeller cover is not blocked or covered.
If necessary open impeller cover and clear blockage as required.
When clearing blockages;
• switch your Blower off using the STOP switch.
• disconnect the spark plug H.T. lead.
• wear safety gloves.
LR02390A-A.indd 21
22/07/2014 4:37:50 PM
Not for
Reproduction
