18
Petrol (unleaded)
2-stroke oil
5 litre
200 ml
(Non Victa Formula V 2-stroke Oil)
Mixing procedure: 25 parts petrol to 1 part oil
5 litre
100 ml (
Only for Victa Formula V 2-stroke Oil
)
Mixing procedure: 50 parts petrol to 1 part oil
USE Clean fresh "Regular Unleaded Fuel"
Fuel with up to 10% ethanol can be used
Recommended fuels
•
Use only a mixture of normal unleaded petrol and 2-stroke engine oil. Mix the fuel
mixture as indicated on the fuel mixing table.
•
Start the machine at least 3m away from the refuelling site to avoid the possible
risk of fire.
•
Do not smoke whilst refuelling or working with the machine.
•
Do not use the blower near inflammable liquids or gases. This could result in an
explosion and/or fire.
•
Pour the correct quantities of petrol and 2-stroke oil into a container. Then shake the
container well.
•
Add 500ml of fuel/oil mix into the fuel tank and secure cap.
NOTE: Unit may need to be reprimed if it has run out of fuel after use.
Fuel mixture table
Do not use a fuel mixture which has been kept for longer than 90 days
as it may damage the unit.
Use Non-Victa makes of 2-Stroke oil at the mixing ratio of 25:1
If inadequate lubrication causes engine damage, the manufacturer's
engine warranty will be void
Only use containers designed and approved for the purpose to
transport and store fuel.
Fuel & Oil
Blower Vac Maintenance
Maintaining the blower vac
• Periodically check the unit for correct assembly, breakage of parts and any other condition
that may affect its operation. If damaged, have the unit repaired before use.
• Store the unit in a well ventilated area, away from any naked flames such as those found
in gas hot water heaters.
• VICTA recommends that all maintenance, repair and inspection work be carried out by a
VICTA Authorised Service Centre.
• Check blower tubes, impeller cover and vac intake tubes are correctly attached before
and after each use.
LR02390A-A.indd 19
22/07/2014 4:37:48 PM
Not for
Reproduction
