13
Check the machine for the following each time before use:
•
That there are no leaks in the fuel system.
•
That all screws are securely fastened.
• Blower air tube, blower nozzle, impeller cover, vac intake tubes and vac bag are secured
in the correct position.
NOTE: Do not use the blower unless fully assembled as per assembly instructions.
See steps 1 to 4 in the vac assembly section (page 11) for instructions to
reassemble vac bag.
Check the position & operation of controls to ensure you are
comfortable before you start using the machine.
Check all components are assembled as per assembly instructions
on page 10-12 before starting the machine.
Before Starting Machine
ASSEMBLY
PROCEDURES
Vac Bag Removal
Remove vac bag when full.
2. Turn clockwise to
release exhuast tube/
bag.
1. Screw anticlockwise to
unlock exhuast tube/
bag.
3. Slide the exhuast tube/
bag off.
OPERATING
INSTRUCTIONS
LR02390A-A.indd 14
22/07/2014 4:37:39 PM
Not for
Reproduction
