18
•
Appendix 1
XX176-00-00 Rev 507 VNCTRL-1 Remote Control Panel
SiteName=V910-GMT time
Comment-NumberOfDevices=Number Of Devices To Record From The Site Above
NumberOfDevices=1
•
This section indicates the number of devices (cameras/mics) being recorded from any of the
transmitters previously configured. Each transmitter will have its own site settings. If you have 1 DVR
with 2 cameras and 2 mics being recorded, you will have this section for Site _1 and the number of
devices will be 4. If you have 2 IP cameras with video only, you will have this section for Site_1 with 1
device and Site_2 with 1 device.
Note: If all the set sites in the default file are not needed, unnecessary files can be deleted from this section.
•
The Site name is the name of the transmitter (DVR1, CAM1, etc.).
3. [Site_1_Device_1]
Comment-DeviceID=The device index as it appears in the site list
DeviceID=1
DeviceType=Camera
•
Each of the sites previously defined will have this section per device (i.e., if you defined 1 device, this
will appear once; if you defined 4 devices, it will repeat 4 times).
•
The top line will have a site number and device number.
•
The device ID is the number of the transmitter, that is camera 1 will have device ID 1 and camera 5
will have device ID 5. Microphone 1 will also ID 1.
•
Device type can be either Camera or Microphone and will correlate to the ID.
4. [StorageSite]
SiteName=JM_XP_WS_
•
This section will indicate where the recording takes place (which Database). Normally this will be on
the local unit that the remote control is connected to.
•
The Site name is the name of the transmitter (DVR1, CAM1, etc.).
Device
Site